You ask for a price on poly bags and the supplier answers with questions: What’s going in it? How heavy? Any sharp edges? Food contact? How will it be filled? If that feels like friction — you wanted a number, not an interview — here’s the reframe: those questions are free packaging engineering, and the suppliers who don’t ask them are the ones to worry about. Here’s what each question is actually solving.

“What’s going in the bag?”

This one question quietly decides the material. Food means FDA-compliant resin and the documentation behind it. Electronics might mean anti-static film. Metal parts that sit in storage might call for corrosion-inhibiting VCI bags. Retail product where looks matter leans toward high-clarity LDPE. The supplier isn’t being nosy — they’re routing you to the right film family before a dollar is spent.

“How much does it weigh?” and “Does it have edges?”

Together these set the thickness — the mil — which is most of your price. Weight stresses the film and the seals; corners and points concentrate force and punch through film that weight alone never would. A supplier who knows both numbers can often spec you thinner than you’d have guessed, saving money on every bag forever. One who doesn’t ask will either overbuild the bag (you overpay) or underbuild it (it fails). The full logic lives in our mil thickness guide.

“How will the bag be filled?”

A bag filled by hand on a table and a bag filled on an automated line are different products. Machine filling usually means wicket bags — stacked on a wire so the line can grab one after another — with the lip and hole spacing matched to your equipment. Hand filling might just mean an easy-open top. Answering this question prevents the expensive version of learning it: a pallet of bags your line can’t run.

“How does it get closed?”

Tape, heat sealer, twist tie, zip, fold-over — the closing method can change the bag’s length (you need material to close with), and sometimes the style. It’s a thirty-second question that prevents bags that are exactly product-sized and impossible to shut.

“Where does the bag go after that?”

Shipped loose in cartons? Stacked on pallets outdoors? Frozen? Displayed on a retail peg? Each destination pushes a spec: shipping abrasion favors tougher film, freezers favor materials that stay flexible when cold, retail pegs need hang holes, and bags over a certain size need a printed suffocation warning to satisfy many retailers. This is the question that catches requirements you didn’t know you had.

“How many, and is it recurring?”

Volume isn’t small talk — it’s economics. Machine setup costs the same for a short run or a long one, so quantity drives the per-bag price, and a recurring need can be scheduled as repeating production rather than quoted fresh each time. Honest numbers here get you honest pricing, including advice like “order these two items together and save the freight.”

The Pattern

Notice what just happened: six questions, and every one either saved you money, prevented a failure, or caught a hidden requirement. That consultation would cost real money from a packaging consultant — from a good supplier, it’s just how quoting works. This is also, quietly, the best reason to talk to a manufacturer directly: the person asking can see the machines that will run your job. (More on that chain in distributor vs. manufacturer.)

So next time, bring answers — our first-time buyer’s checklist covers all of them — and judge your suppliers by their questions. Want to experience the interview from the friendly side? Tell us what you’re packaging and we’ll start asking.

Have a Packaging Question?

M Plastics manufactures LDPE bags and film in Los Angeles with in-house extrusion and printing. Tell us what you're packaging and we'll help you spec the right bag.

Get a Quote